OK.. All figures allowed with a maximum allowed weight of 2.0 grams..
(figures may be custom, hollowed out, or any manufacturer as long as they meet weight restrictions..)
Any base that fits completely under the standard platform of (miggle/bb/ff.com figures) is allowed. Bases may weigh a maximum of 1.3 grams.
Even with these weight allowances, a figure/base combo of 3.4 is allowed, due to figures being possible 2.04 and a base 1.34, which would give a 3.4 total on a tenth gram scale. Hundredths scales are too prone to even air movement..
I like the idea of keeping it simple.. SO.
I'd make the miggle 620 scale board the standard.
As long as it was to scale, other boards would be allowed.
Steel, fiberboard, or a board with a field cover all allowed.
Home made TTQB's for passing or kicking would be allowed, as well as the miggle TTQB, OR a custom type kicker made from a miggle TTQB.. Anything someone is ingenious enough to come up with that would make their passing or kicking more accurate is good.. (Id have to buy one though)
Course.. none of this means I would require someone to use a TTQB or modified TTQB to pass.. but thats another thread.
|