Simple
Use double side adhesive foam tape. It works for me. Another idea, you can make counter weight for the motors using two 4-40 nut glued with epoxy on a piece of ½ by ½ inch brass. You make a tiny hole that fits the rod and you glue it with epoxy to the rod. Yes the motors are inside the black boxes.
You should keep an acces from underneath the board. We nerver know what can happen to the motors and wires. Don't forget to use a rheostat or speed controller, that way you can control the vibration of the board.
Pierre
Last edited by pit couture : 11-23-2007 at 06:10 PM.
|