Thread: Custom Bengals Board Finished!!!
View Single Post
  #7  
Old 02-25-2009, 01:04 PM
roller's Avatar
roller roller is offline
MFCA MEMBER
  
Join Date: Sep 2008
Location: dayton, ohio
Posts: 558
Smile Board Power
It runs off of a DC wall wart at 1.5V DC and 600mah. The jack is visible in the picture of the home controls (it is to the LEFT of the control knob). I only use one motor (I prefer only one motor) but it is easily expandible to 4 or more with an upgrade to a higher voltage and mah wall wart. It is rated up to 12VDC and several amps of power.

I actually have it wired ready to accept a timer and buzzer as well when I perfect that system.

Thanks for the accolades,

D Roller
Last edited by roller : 02-26-2009 at 12:46 PM.
Reply With Quote