I would recommend mounting ONE gotham motor at the 50 yard line, about 1-2 inches from the edge. I would mount the motor using a fast cure 2 part epoxy so that the chord came out at the 50. This baby will hum. I'd considered mounting Tudor style motors, but I didn't want to get into rivets etc. If the Tudor motors had very flat flanges (were the rivet goes) I suppose you could mount that to the metal surface using an epoxy as well. Please keep in mind I've never mounted the Tudor motors, I'm just thinking out loud and offering a thought on a way to do that without the rivets. Looks good.
Joe
__________________
"Ask not what the MFCA can do for you, but what you can do for the MFCA"
|