CAN I PUT THE STICKER ON THE BOARD??need help with this fast

[HOOP]

FELLAS,

i am in the middle of doing up a board and wanted to know if i can put the MFCA sticker in the middle of the board without it effecting play.
i gotta get this fast before the paint fully dries off.
can ya help me somebody??
thanks

i have some on my boards, but all don't work call me...i recently been buying mad old and new cowboy stickers for the endzones, scoreboards and 50 yd line. AND THEY LOOKS SWEET, I HAD TO FILE THE EDGES ON A COUPLE, WITH A EMORY BOARD, AND PLAYERS RUN SMOOTH NOW.

[Electric Coach]

The thickness of the sticker makes all of the difference. If the sticker is a millimeter too thick, it can be the difference between your players moving across its edges smoothly or getting stuck at that spot. Believe it or not, how a base is tweaked can cause a base to get hung up on the edges of the sticker as well. The tips of tweaked base prongs become flimsy after tweaking. Prongs in that condition are prone to getting hung up. Prongs that are more rigid like that of an untweaked base have an easier time moving over the sticker’s edges. If you make it past that hurdle, then it will work.

If it were my board, I wouldn’t do a sticker. I would have a board done with all of the graphics of my choice.

Maurice

The Electric Coach

[pit couture]

I don't have much experience with it, but I would use a water slide decal paper. You print your logo, let it dry, apply Krylon acrylic clear coat on it. Once the clear coat is dry you place your sticker in center field or the end zone. Usually, after all the art work is done, your clearcoat the entire playing surface.

Pierre

[larue]

Why bother with all that work, put down a full vinyl cover with exactly what you want on it and the players run like their on glass.
I'll make it for you,
Larue