Getting Miggle stadium lights to work

[Tomkat]

This what I used . . .

A - Power strip for dollhouses, trains, etc, rated at 12 volts, (hobby shop)
B - Screw base bulbs, 7.5 volts, (Radio Shack)
C - Screw base with mounting brackets and solder tabs (Radio Shack)
D - Lite gauge wire,



Remove the battery guts from the light.




Drill a hole in the bottom of the light fixture to feed the wire through




I found this package of small mirrors at a hobby shop, they are 1/2" x 1/2",
3/4" x 3/4", and 1" x 1" . . .




Glue them to the top, bottom, and back of the fixture.

The screw base and light will fit perfect in the spot the old battery and light used to be. Run the wires to the power strip, run the power strip to a transformer and you are done. The transformer I used is an old one from an HO train set.

If you try it and have problems, just hollar.