BuzzBall Rules

[Coach Rip]

BUZZBALL WORLD CHAMPIONSHIP VIII EQUIPMENT

STANDARD FIGURES - BuzzBall, Tudor/Superior/Miggle (Fab5)/ Proline Deluxe era, including original Big Men, figures are allowed. All figures must meet specs as described within the rules. NO ALTERATIONS.

Proline, Miggle Repro & Tudor Original Big Men figures will be allowed. However, EXTREME caution should be used in their selection.
Some poses come in at or just under the maximum allowable figure weight (2.0 grams) unpainted, out of the bag. If these figures are used, they MUST make weight (2.0) grams fully detailed without parts being removed or shaved, or they will NOT pass equipment inspection.
This rule applies to all allowable figures and this notice is to serve as a caution that these particular figures are sometimes known to exceed maximum allowable weight limits, before and/or after detailing. Please use caution if using these figures as they are heavy. Some are too heavy to pass inspection. No whining if they do not make weight!

Accessories may be added so long as the figure meets size and weight restrictions, and the accessories do not interfere with game play.
One or two sided non metallic tape may be applied to the underside of your figure's stand to help secure it to the base. The tape may not extend beyond the figure's platform. The tape must be applied so it does not give the figure a "jacked" or "leaner" appearance when placed on its base, keeping in mind the weight and height restrictions on the figures. Adhesive pads DO NOT qualify as tape and WILL NOT be allowed. NO GLUE ALLOWED.

*Figures for the Offensive unit will be wearing Dark Jerseys.
*Figures for the Defensive unit will be wearing Light Jerseys.
*Total Figures - Minimum Total - 22 (11 Dark, 11 Light), Maximum Total - 34 (no more than 23 in either light or dark).

*Numbering System: Offensive figures must also follow a numbering system to so for certain positions.
OFFENSE - OL 50-79, 90-99, (00 at Center only). QB, RB, WR, TE - 00, 0-49, 80-89.
DEFENSE - No Restrictions.

*All figures except TTQB's must be numbered on the front and back of their jerseys. Each figure must have a unique and different number from all others on a given team and the number on front and back of a given figure must be the same number. Be sure to prepare your offensive and defensive units according to the above specs!

*Arms Forward Figures - Arms forward figures are figures that have any portion of both arms that extend to the front edge of their stand or beyond. These figures are legal for play but may not be used at and skills positions on offense (QB, RB, WR, TE, KR), but are allowed anywhere on defense. A figure with more than one appendage extending to or beyond a side or rear edge of their stand will be treated as an Arms Forward figure.

*Blocker Figures - Blocker figures are figures that have both arms folded at the elbows with the forearms and hands connected to the upper arms. Also known as the FAB5 "Guard" figure. These figures are legal for play but may not be used in the backfield or as Wide Receivers, but are allowed to play at Tight End if properly numbered, and can play anywhere on defense. If used at TE, that player's base must be LESS THAN a base width apart from the closest offensive lineman, may not be stacked or in the shade of another team mate, and must be set and remain ON the LOS before and after audibles.

*Maximum Weight - 2.0 grams fully dressed. *Maximum Height - 38mm or 1.5".
*Maximum Length - 33mm. *Maximum Width - 29mm.

Custom Figures Are Allowed ONLY in Custom Division:
May be configured from figures mentioned in the list above. NO BODY PART(S) ALLOWED ABOVE TOP OF HELMET. Hand(s) MAY now be BELOW the lowest knee. Arms forward figure rule still applies as in the past (can not play skills positions).

*Maximum Height - 38mm or 1.5".
*Maximum Length - 33mm. *Maximum Width - 29mm.

BASES - BuzzBall, Tudor/Superior/Miggle bases are allowed. Each coach is allowed 1 Base Per Figure + 6 Extra Bases For Figures + 1 Appropriate Base Per TTQB. Tudor/Superior/Miggle Deluxe era and BuzzBall bases are allowed. This Does NOT Include Brown TTC Bases & Dials as they were made by the Playtime company and are ILLEGAL. Legal bases from the above manufacturers include Single Clip Rookie Bases, Double Clip Rookie Bases, TTC Bases with Dials, and Red Peg TTC Bases. Miggle ProLine Rookie and TTC bases ARE allowed at this time.

BASE TWEAKING: Prongs - Base prongs may be pulled, stretched, curled, clipped, or otherwise physically manipulated, keeping in mind it must meet the overall stated base height specifications. No portion of any prong or prongs may extend beyond the outer shell rim with or without a figure on top of it. No part of a base that is not a prong can be made into a prong or made to act as a prong through any process of alteration. Such a part or parts may be removed but not manipulated unless it can retain its factory shape.
EXCEPTION: A base may have 2 or more sets of prongs removed (immobile base). This eliminates its ability to "push" another player or into the LOS (see push rule). In such cases as with a Multi-Directional base, the dial tab may/will make contact with the board, acting as a prong. Under these conditions the dial tab may be tweaked like any other prong. This Is Legal. Aside from this, prongs may be removed but not added.

Base prong configurations may vary from one sanctioned manufacturer to another.
Dials and prong bars from one era or manufacturer to another may be switched provided no alterations to the base shell is required, they are firmly held into place, and they meet specs.

Shells - Base shells must be free of sprue remains or slag (flashing) and must be free of any recesses or protrusions. Base shells may not be otherwise altered.
NOTE: No chemical alterations are allowed to any base.
No weight may be added to any base except the figure placed on it.
Base shells may be marked between it's rear corners on the outside of the shell for identification purposes. Use magic marker, a small amount of paint, or decals, etc., for this.
No excesses and no plates allowed.
One piece of tape may be added to the leading edge of a TTQB passer's base shell to help assure that the passer does not move from its position during a pass attempt (aka, the electric slide).

*Maximum Base Height - 10mm all bases.
*Maximum Base Weight - Rookie (all) - 0.9 grams, TTC w/Dial - 1.3 grams, Red Peg TTC - 0.9 grams.


PLAYERS - A player consists of a fully detailed figure on its base with or without appropriate tape affixed on the underside of its platform and legally mounted on a base. This assures that the figure can be removed from its base easily for inspection. A figure's platform must be evenly distributed across the base's platform. Any remaining portion of the figure's platform that extends past the base's platform is considered to be part of that player's base if a ball carrier or eligible receive for contact purposes during play, but can prevent a tackle from being made by such a player. Such portions of that figure's platform should be trimmed to fit within the confines of the base's platform area.


TEAMS: Each team entered may have up to 34 players plus up to five (5) TTQB's. TTQB's do not need to be painted or have numbers. Those that are numbered can be in duplicate with respect to one another or any of the other 34 players. TTQB's, and ONLY TTQB's, are allowed to be glued to their bases.


TTQB's: TTQB's are not allowed to play any on-field position with other players except to kick FG's. If used to pass, they will be subbed in at the spot of the on-field QB to pass, then replaced with the original on-field QB. If an onsides kick, they will be used to kick, then replaced by a legal player designated during setup.

TTQB MODIFICATIONS: No springs, cups, or devices can be added to the TTQB figure. Tape may be added to the leading edge of its base shell for the purpose of keeping the TTQB in place during TTQB passes. Kicking leg may be removed for passing.
Notches are allowed in the throwing hand and/or arm to aid for gripping, ball positioning, etc. Forward arm may be bent but not removed. Rear tab can be present and can be bent as desired, or removed.
QB figure may be bent in any manner so long as the head does not extend past any portion of the base shell's top deck area. Arms can be bent in a desired position.
If you want to do something not described here please get permission and a clarification in advance.


PASSING EQUIPMENT & GAME BALLS

Pass Simulation Equipment - SIW, Inc. will supply all Pass Simulation equipment for this event. A set will be issued to all paid entrants before the games begin. It is the responsibility of each coach to keep and maintain their own balls and PS sticks. Should a coach need additional PS equipment, it will be available for sale throughout the event.
Spot Passing Targets – SIW will be providing Spot Passing Targets for this event. An BuzzBall Spot Passing Target will be issued to each game board for the duration of the tournament.
Passing Footballs - SIW stock felt stock footballs are the ONLY footballs allowed for TTQB passes. No other balls are allowed. Coaches are permitted to enhance footballs with glue or paint products so long as the ball does not damage the board or players. Oversized Felt footballs ARE NOT ALLOWED.


OTHER EQUIPMENT - Other Equipment Allowed In A Team Box:

Down Markers, 10 yard Markers, On-field Refs (for use during pivots).

Other Equipment Not In Team Box: A coach may elect to bring along a vintage 620 size board but should not have it in the gaming area unless requested by an event official.

Custom goal posts may also be considered for use during this event. If you would like yours to be considered, please show it to an event official for approval before the event begins.

Personal boards and goal posts which are selected for tournament use can be kept at the check in area when not in use if requested by the owner.