![]() |
![]() |
|
#1
|
|||
|
|||
![]() I am using delta ceramcoat bright yellow
|
#2
|
||||
|
||||
![]() Is the problem that the paint is transparent when applied or that the paint is so lumpy that it takes a couple of coats to smooth out the layers of paint out ?
|
#3
|
|||
|
|||
![]() Yes Jeff, I do see transparent at the bottom of the bottle. The paint is very glumpy from my having to paint over and over.
|
#4
|
||||
|
||||
![]() take off the paint, it should just peel off using your finger nails and fingers, ............. then, get some "extender" and I would also try to find some apple barrel gloss yellow.
try your paint, put about a table spoon in something, and put in a few drops of extender, ................thoroughly mix, and try painting again. If that doesn't work, use the apple barrel gloss yellow and mix it with your yellow to get your desired shade/results, .................one of these two options should work for you. ![]()
__________________
EmEff Rip |
#5
|
|||
|
|||
![]() I will definitely will try that
|
#6
|
||||
|
||||
![]() Miggle gold/yellow...one coat and done
__________________
"Ask not what the MFCA can do for you, but what you can do for the MFCA" |
#7
|
||||
|
||||
![]() Have you used a primer on the figure before painting? I always hit a figure with a light coat of spray primer first before painting.
__________________
Coach Shabby J - MFCA Pacific West Region Rep Casciolini & Luffeigh, Inc. Los Angeles...making EF history for over a decade. |
![]() |
Thread Tools | |
Display Modes | |
|
|