#1
|
|||
|
|||
Removable Helmet Figures Pics ...Finally!
After months of trying to come up with an idea of how to make a removable helmet, I found a cost efficient way to help me with this idea..oaktak paper! I know they are squared and look a little warped but they stay on their heads when the gameboard is on and come off easily.
|
#2
|
|||
|
|||
Hoping to get some feedback or suggestions, thanks!
|
#3
|
|||
|
|||
Drill the inside of the helmet out
One way would be the cut the helmet off the figure and drill it out the make a head or take a head off another figure!!
|
#4
|
||||
|
||||
Looking Beneath the Surface
Mike,
I want to applaud you on your creative spirit. So many times, people are scared to "put it out there" in fear of criticism, failure, etc. But you were willing to put it out there and ask for comments. Sometimes, I think guys will not comment in fear of what they think the poster may say. I know it to be true of some that sometimes its best just not to say anything. In some instances, I would even agree but I think in this instance, you wanted an honest opions on what others thought. I think beauty is in the eyes of the beholder. I think if you think in your heart of hearts that you think its beautiful, that's what you deem as art. I would like to offer a few suggestions. Seeing that it is a Footballfigures.com product, I first want to thank you for using our product to demonstrate your artistic talents. I would then like to say the concept of creating players which can pull off their hats is very good. I do something quite similar. I cut a hat off a player and glue it onto another players arm. I then take a model "O" scale person form sitting figures or whatever and cut that. If I want to have the heads interchangeable, I would then drill a hole into the figure's upper body which would have the same diameter as a plastic screw that I can get at your local Home Depot. I would then take the cut head from the hobby person and super glue a piece of the threaded screw onto it. For the other helmet that he can either carry or just have on the ground, I would put another screw piece at the helme'ts base. Thus, I would be able to screw and unscrew either the helmet or just the face into the body of the figure. Mike, so many things I have had negative feedback on. You may have interpreted the lack of response as negative and some may very well have been. However, you keep on persevering and try some similar techniques as what I have talked about earlier and you should be okay. Keep the creative juices flowing. Continue to stay hyped up about customizing because its guys like you that think outside the box is what will help the hobby continue to endure. Give me a call any time and we can discuss customizing techniques. Reginald Rutledge (817) 654-4146 |
#5
|
||||
|
||||
good concept i like the faces u just need to sand the edges of the helmets,other then that good job.
__________________
NEED CUSTOM FIGURES OR TEAMS PAINTED HIT ME UP!!!! Shawndmz@aol.com |
#6
|
|||
|
|||
Thanks for the suggestions. I think I mentioned this a while back but Reggie is the reason why I got back into the hobby. I saw his website and was in awe. His figures are awesome!! They can be easily posed into different positions and be dremeled with ease. My goal is one day to create 12 of these removable helmet teams, build a stadium with a model toy train going around it and have scale buildings in the background to create a football city! I know it will take a long time but it'll be worth it.
|
#7
|
||||
|
||||
Hmmm....
You could apply Reg's idea to arms, legs, torsos, etc. One minute he's an arms forward figure, the next his arms can rotate back to create unique center of gravity to rush around the end. How about a passing QB whos arm rotates down to tuck and run or to make a handoff, or a reciever who reach up to make a catch or to have them lower in order to run with a nice stride (and lower center of gravity). I actually have minature screws and inserts so I'm going to give this a try...tonight!
|
#8
|
||||
|
||||
I've got those type of figures
Michigan Joe that have rotating parts. Yes, it does work so maybe that is something he may want to look at.
Mike, I am happy I made an impact on you becoming interested in the game. That's why I feel a need to help whenever I can. Take care, Reg |
Thread Tools | |
Display Modes | |
|
|